Ip Bgp Policy Community-List Match-Type - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp policy community-list match-type

Configures the type of matching to be performed with a community string list.
ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num}
match-type {exact | occur}
Syntax Definitions
name
none
no-export
no-advertise
no-export-subconfed
num:num
exact
occur
Defaults
parameter
exact | occur
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
By default, this command only allows routes to pass if the community string exactly matches the commu-
nity attribute of the route.
Examples
-> ip bgp policy community-list commListC 600:1 match-type exact
Release History
Release 6.1; command was introduced.
page 25-108
Community name, e.g., CommListAIn, ranging from 0 to 70 characters,
or a value of none. The Community name is case sensitive.
Removes the community restrictions on the community section of the
route map.
Routes in this community are advertised within the AS but not beyond
the local AS.
Routes in this community are not advertised to any peer.
Routes in this community are not advertised to any external BGP peer.
The community number, given in the form of the AS number and the
community number, separated by a colon, as defined in RFC 1997.
Checks for an exact match of the community string and the community
attribute.
Checks for an occurrence of the community string anywhere in the
community attribute.
default
exact
OmniSwitch CLI Reference Guide
BGP Commands
June 2012