Interfaces
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Default services listening on LAN ports
The following table lists the default services listening on the specified ports on the LR54 LAN
interfaces:
Description
DNS server
DHCP server
SSH server
Web UI
Configure an interface to operate in passthrough mode.
You can configure interfaces on your LR54 device to operate in passthrough mode, which means that
the device passes the IP address assigned to it on a WAN or cellular modem interface, to a client
connected to a LAN interface.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
LR54 User Guide
TCP/UDP
Port numbers
UDP
53
UDP
67 and 68
TCP
22
TCP
443 (also listens on port 80, then redirects to port 443
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
194