Change The Default Lan Subnet - Digi IX14 User Manual

Initial configuration

Change the default LAN subnet

You can change the IX14 default LAN subnet—192.168.2.1/24—to any range of private IPs. The local
DHCP server range will also change to the range of the LAN subnet.
To change the LAN subnet:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces > LAN > IPv4.
4. For Address, change the IP address to an alternate private IP. You must also specify the subnet
mask. It must have the syntax of IPv4_address/netmask.
5. Click Apply to save the configuration and apply the change.

Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX14 User Guide
Change the default LAN subnet
51