Default Services Listening On Lan Ports; Configure An Interface To Operate In Passthrough Mode - Digi IX30 User Manual

Interfaces
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the show dhcp-lease
> show dhcp-lease
IP Address
-------------
192.168.2.194
192.168.2.195
>
3. Additional information can be returned by using the
> show dhcp-lease verbose
IP Address
MAC Address
-------------
-----------------
192.168.2.194
ba:ba:2c:13:8c:71
192.168.2.195
09:eb:10:f0:bc:16
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Default services listening on LAN ports
The following table lists the default services listening on the specified ports on the IX30 LAN
interfaces:
Description
DNS server
DHCP server
SSH server
Web UI

Configure an interface to operate in passthrough mode.

You can configure interfaces on your IX30 device to operate in passthrough mode, which means that
the device passes the IP address assigned to it on a WAN or cellular modem interface, to a client
IX30 User Guide
command at the Admn CLI prompt:
Hostname
---------------
MTK-ENG-USER1
MTK-ENG-USER2
Hostname
--------
MTK-ENG-USER1 May 19 08:25:11 UTC 2021
MTK-ENG-USER2 May 20 11:32:12 UTC 2021
TCP/UDP Port numbers
UDP 53
UDP 67 and 68
TCP 22
TCP 443 (also listens on port 80, then redirects to port 443
Expires
-------
show dhcp-lease verbose
Expires
------------------------
Local Area Networks (LANs)
command:
Type Active
------- ------
Dynamic Yes
Dynamic Yes
188