Default Services Listening On Lan Ports - Digi IX20W-PR User Manual

Interfaces
Show DHCP server status and settings
View DHCP status to monitor which devices have been given IP configuration by the IX20 device and
to diagnose DHCP issues.

Web
Log into the IX20 WebUI as a user with full Admin access rights.
1. On the main menu, click Status
2. Under Networking, click DHCP Leases.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the show dhcp-lease
> show dhcp-lease
IP Address
-------------
192.168.2.194
192.168.2.195
>
3. Additional information can be returned by using the
> show dhcp-lease verbose
IP Address
MAC Address
-------------
-----------------
192.168.2.194
ba:ba:2c:13:8c:71
192.168.2.195
09:eb:10:f0:bc:16
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Default services listening on LAN ports

The following table lists the default services listening on the specified ports on the IX20 LAN
interfaces:
IX20 User Guide
command at the Admn CLI prompt:
Hostname Expires
--------------- -------
MTK-ENG-USER1
MTK-ENG-USER2
Hostname Expires
-------- ------------------------
MTK-ENG-USER1 May 19 08:25:11 UTC 2021
MTK-ENG-USER2 May 20 11:32:12 UTC 2021
Local Area Networks (LANs)
show dhcp-lease verbose command:
Type
-------
Dynamic
Dynamic
Active
------
Yes
Yes
219