Service Statistics Interfaces Counter - Allied Telesis IE220 Series Manual

Industrial ethernet layer 2+ switches, command reference for alliedware plus version 5.5.3-0.x
Table of Contents

Advertisement

I
C
NTERFACE
OMMANDS

SERVICE STATISTICS INTERFACES COUNTER

service statistics interfaces counter
Overview
Use this command to enable the interface statistics counter.
Use the no variant of this command to disable the interface statistics counter.
Syntax
service statistics interfaces counter
no service statistics interfaces counter
Default
The interface statistics counter is enabled by default.
Mode
Global Configuration
Example
To enable the interface statistics counter, use the following commands:
awplus#
awplus(config)#
To disable the interface statistics counter, use the following commands:
awplus#
awplus(config)#
Command
Version 5.4.7-2.1: command added
changes
C613-50644-01 Rev B
configure terminal
service statistics interfaces counter
configure terminal
no service statistics interfaces counter
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
463

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie220-6ghxIe220-10ghx

Table of Contents