Allied Telesis IE220 Series Manual page 576

S C
WITCHING OMMANDS
-
SWITCHPORT PORT SECURITY AGING
To return to static mode by stopping the MAC addresses that have been learned
by port security from aging out on port1.0.2, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related clear port-security intrusion
commands
show port-security interface
show port-security intrusion
switchport port-security
switchport port-security maximum
switchport port-security violation
Command Version 5.5.1-0.1: port-security on LAGs added for SBx81CFC960, SBx908 GEN2,
changes x950, x930, x550, x530, x530L, x320, x230, x230L and x220 Series switches
C613-50644-01 Rev B
configure terminal
interface port1.0.2
no switchport port-security aging
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
576