Allied Telesis IE220 Series Manual page 529

S C
WITCHING OMMANDS
- -
LOOP PROTECTION LOOP DETECT
to be transmitted by the device each second (the Total Instances entry). It also
shows the number of packets that timed out for each port (the Timeout entry). The
show loop-protection counter command shows the number of timeouts per
VLAN for each port.
See the "Loop Protection" section in the
Configuration Guide
information before applying this command.
Example To enable the loop-detect mechanism on the switch, and generate loop-detect
frames once every 5 seconds, use the following commands:
awplus#
awplus(config)#
Related loop-protection action
commands
loop-protection timeout
show loop-protection
C613-50644-01 Rev B
for more relevant conceptual, configuration, and overview
configure terminal
loop-protection loop-detect ldf-interval 5
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Switching Feature Overview and
529