Clear Mep Counter - Allied Telesis IE220 Series Manual

C F M
ONNECTIVITY AULT ANAGEMENT

CLEAR MEP COUNTER

clear mep counter
Overview Use this command to clear statistics counters for all Local MEPs within a given
Maintenance Association (MA) and its associated Maintenance Domain (MD), or to
optionally clear counters for one specific Local MEP.
clear mep counter domain <domain-name> service <ma-name> 
Syntax
[mep <mep-id>]
Mode User Exec/Privileged Exec
Example To clear the statistic counter for an MEP with the MEP ID "12", use the command:
awplus#
12
Related show ethernet cfm maintenance-points local mep
commands
Command Version 5.4.7-1.1: command added
changes
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
C613-50644-01 Rev B
C
OMMANDS
Parameter Description
domain
Specify the Maintenance Domain that Local MEP(s) are to have
their counters cleared for. Both domain and service must be
specified.
<domain-name>
Specify the Maintenance Domain's CLI instance name.
service
Specify the Maintenance Association that the Local MEP(s) are to
have their counters cleared for. Both domain and service must be
specified.
<ma-name>
Specify the CLI name that identifies the service (Maintenance
Association (MA)) instance.
mep
Specify one specific Local MEP.
<mep-id>
Specify the Local MEP instance by MEP-id.
clear mep counter domain MD-INST1 service MA-INST1-1 mep
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
319