Table of Contents
Advertisement
VLAN C
OMMANDS
SHOW VLAN
show vlan
Overview
Use this command to display information about a particular VLAN by specifying its
VLAN ID. Selecting all will display information for all the VLANs configured.
show vlan
Syntax
{all|brief|dynamic|static|auto|static-ports|<1-4094>}
Mode
User Exec and Privileged Exec
Example
To display information about VLAN 2, use the command:
awplus#
Output
Figure 16-5: Example output from the show vlan command
VLAN ID
Name
======= ================ ======= ======= ====================================
2
VLAN0002
...
Related
vlan
commands
Command
Version 5.5.0-1.3: Support for up to 5 VLANs added to AR1050V
changes
C613-50644-01 Rev B
Parameter
Description
<1-4094>
Display information about the VLAN specified by the VLAN ID.
all
Display information about all VLANs on the device.
brief
Display information about all VLANs on the device.
dynamic
Display information about all VLANs learned dynamically.
static
Display information about all statically configured VLANs.
auto
Display information about all auto-configured VLANs.
static-ports
Display static egress/forbidden ports.
show vlan 2
Type
State
STATIC
ACTIVE
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Member ports
(u)-Untagged, (t)-Tagged
port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
600
Advertisement
Table of Contents
