Ip Irdp - Allied Telesis IE220 Series Manual

IP A P
DDRESSING AND ROTOCOL

IP IRDP

ip irdp
Overview This command enables ICMP Router Discovery advertising on an interface.
However, the interface does not send or process Router Discovery messages until
at least one IP address is configured on the interface with the
Addressing and Protocol)
The no variant of this command disables ICMP Router Discovery advertisements
on an IP interface. All transmitting and processing of Router Discovery messages
ceases immediately on the interface.
ip irdp
Syntax
no ip irdp
Mode Interface Configuration for a VLAN interface or a local loopback interface.
To enable Router Discovery advertisements on vlan4, use the following
Examples
commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable Router Discovery advertisements on vlan4, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip address (IP Addressing and Protocol)
commands
show ip irdp
show ip irdp interface
C613-50644-01 Rev B
C
OMMANDS
configure terminal
interface vlan4
configure terminal
interface vlan4
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command.
ip irdp
no ip irdp
ip address (IP
839