Table of Contents
Advertisement
S
C
WITCHING
OMMANDS
-
SHOW STORM
CONTROL
show storm-control
Overview
Use this command to display storm-control information for all interfaces or a
particular interface.
show storm-control [<port>]
Syntax
Mode
User Exec and Privileged Exec
Example
To display storm-control information for port1.0.2, use the following command:
awplus#
Output
Figure 15-12: Example output from the show storm-control command for
Related
storm-control level
commands
C613-50644-01 Rev B
Parameter
Description
<port>
The port to display information about. The port may be:
• a switchport (e.g. port1.0.4)
• a static channel group (e.g. sa2)
• a dynamic (LACP) channel group (e.g. po2)
show storm-control port1.0.2
port1.0.2
Port
BcastLevel
port1.0.2
40. 0%
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
McastLevel
DlfLevel
100. 0%
100. 0%
566
Advertisement
Table of Contents
