Show Debugging Power-Inline - Allied Telesis IE220 Series Manual

P E C
OWER OVER THERNET OMMANDS
-
SHOW DEBUGGING POWER INLINE

show debugging power-inline

Overview This command displays Power over Ethernet (PoE) debug settings.
show debugging power-inline
Syntax
Mode User Exec and Privileged Exec
Example To display PoE debug settings, use the following command:
awplus#
Output Figure 20-1: Example output from the show debugging power-inline
Related debug power-inline
commands
terminal monitor
Command Version 5.4.8-0.2: added to x550 series products
changes
C613-50644-01 Rev B
show debugging power-inline
command
awplus#show debugging power-inline
PoE Debugging status:
PoE Informational debugging is disabled
PoE Event debugging is disabled
PoE Power Management debugging is disabled

PoE NSM debugging is enabled
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
780