Table of Contents
Advertisement
F
C
M
ILE AND
ONFIGURATION
ANAGEMENT
-
-
-
STRICT
USER
PROCESS
CONTROL
strict-user-process-control
Overview
Use this command to enable Strict User Process Control. This protects sensitive
system files from unnecessary user access. The affected commands are file and
directory manipulation commands and trigger scripting commands.
Use the no variant of this command to turn off Strict User Process Control.
Syntax
strict-user-process-control
no strict-user-process-control
Default
Disabled.
Mode
Global Configuration
Usage notes
In order to maintain backward compatibility, Strict User Process Control is disabled
by default. When you enter the strict-user-process-control command, it prompts
you for a password. Make the password different from any existing privileged
management passwords. Store the password carefully and securely, because you
will need it if you want to disable the feature using the no variant of the command.
The command must be entered from a physical console; entering it from a remote
login session is not allowed for extra security.
You can use the show running-config command to confirm whether Strict User
Process Control is on or off. If the feature is running the output will contain the
command strict-user-process-control.
Example
To protect sensitive system files from access, use the commands:
awplus#
awplus(config)#
Related
show running-config
commands
Command
Version 5.5.2-2.1: command added
changes
C613-50644-01 Rev B
C
OMMANDS
configure terminal
strict-user-process-control
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
151
Advertisement
Table of Contents
