Show System Pluggable Detail - Allied Telesis IE220 Series Manual

P C C
LUGGABLES AND ABLING OMMANDS

SHOW SYSTEM PLUGGABLE DETAIL

show system pluggable detail
Overview This command displays detailed pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis reseller or distributor for more information about
the models of pluggables that your device supports.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system pluggable [<port-list>] detail
Syntax
Mode User Exec and Privileged Exec
Usage notes In addition to the information about pluggable transceivers displayed using the
show system pluggable
manufacturing datecode, and type information), the show system pluggable
detail command displays the following information:
•
•
•
•
•
C613-50644-01 Rev B
Parameter Description
<port-list>
The ports to display information about. The port list can be:
• a single port (e.g. port1.0.5)
• a continuous range of ports separated by a hyphen (e.g.
port1.0.5-port1.0.6)
• a comma-separated list of ports and port ranges (e.g.
port1.0.5,port1.0.6)
SFP Laser Wavelength: Specifies the laser wavelength of the installed
pluggable transceiver.
Single mode Fiber: Specifies the link length supported by the pluggable
transceiver using single mode fiber.
OM1 (62.5μ m) Fiber: Specifies the link length, in meters (m) or kilometers
(km) supported by the pluggable transceiver using 62.5 micron multi-mode
fiber.
OM2 (50μ m) Fiber: Specifies the link length (in meters or kilometers)
supported by the pluggable transceiver using 50 micron multi-mode fiber.
Diagnostic Calibration: Specifies whether the pluggable transceiver
supports DDM or DOM Internal or External Calibration.
– Internal is displayed if the pluggable transceiver supports DDM or
DOM Internal Calibration.
– External is displayed if the pluggable transceiver supports DDM or
DOM External Calibration.
– a dash (-) is displayed if neither Internal Calibration or External
Calibration is supported.
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command (port, manufacturer, serial number,
"Getting Started
Guide.
304