Log Console - Allied Telesis IE220 Series Manual

L C
OGGING OMMANDS

LOG CONSOLE

log console
Overview This command configures the device to send log messages to consoles. The
console log is configured by default to send messages to the device's main console
port.
Use the no variant of this command to configure the device not to send log
messages to consoles.
log console
Syntax
no log console
Mode Global Configuration
Examples To configure the device to send log messages use the following commands:
awplus#
awplus(config)#
To configure the device not to send log messages in all consoles use the following
commands:
awplus#
awplus(config)#
Related default log console
commands
log console (filter)
log console exclude
show log config
C613-50644-01 Rev B
configure terminal
log console
configure terminal
no log console
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
383