Clear Loop-Protection Action - Allied Telesis IE220 Series Manual

S C
WITCHING OMMANDS
-
CLEAR LOOP PROTECTION ACTION

clear loop-protection action

Overview Use this command to clear the loop protection actions on the specified interfaces.
clear loop-protection [interface <port-list>] action
Syntax
Mode Privileged Exec
Example To clear the loop protection actions on interface port1.0.2, use the command:
awplus#
To clear the loop protection actions of all interfaces on a device, use the command:
awplus#
Related loop-protection loop-detect
commands
loop-protection action
show loop-protection
C613-50644-01 Rev B
Parameters Description
interface
The interface whose actions are to be cleared.
<port-list>
A port, a port range, or an aggregated link.
clear loop-protection interface port1.0.2 action
clear loop-protection action
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
513