Udld Port Disable - Allied Telesis IE220 Series Manual

U L D
NIDIRECTIONAL INK ETECTION

UDLD PORT DISABLE

udld port disable
Overview Use this command to disable UDLD on an interface. This command disables UDLD
on both copper and fiber ports
Use the no variant of this command to allow UDLD on a fiber port.
Syntax udld port disable
no udld port disable
Default UDLD disable is not set by default.
Usage notes •
•
•
Mode Interface Configuration
Example To disable UDLD on port1.0.1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable UDLD on port1.0.1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related udld enable
commands
udld port
show udld port
C613-50644-01 Rev B
(UDLD) C
OMMANDS
This command always disables the UDLD feature on a port.
The udld port command overwrites this command and enables UDLD on an
interface.
If UDLD has been set globally, using the
AlliedWare Plus ignores the no udld port command on a fiber interface.
configure terminal
interface port1.0.1
configure terminal
interface port1.0.1
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
udld enable
udld port disable
no udld port disable
command, then
729