Show Mac Address-Table - Allied Telesis IE220 Series Manual

S C
WITCHING OMMANDS
-
SHOW MAC ADDRESS TABLE

show mac address-table

Overview Use this command to display the MAC address-table for all configured VLANs.
show mac address-table
Syntax
Mode User Exec and Privileged Exec
Usage notes The show mac address-table command is only applicable to view a MAC
address-table for Layer 2 switched traffic within VLANs.
Example To display the MAC address-table, use the following command:
awplus#
Output See the following sample output captured when there was no traffic being
switched:
See the sample output captured when packets were switched and MAC addresses
were learned:
Note the new MAC addresses learned for port1.0.2 and port1.0.3 added as dynamic
entries.
Note the first column of the output below shows VLAN IDs if multiple VLANs are
configured:
C613-50644-01 Rev B
show mac address-table
awplus#show mac address-table

VLAN port mac
1 unknown 0000.cd28.0752
ARP - 0000.cd00.0000
awplus#show mac address-table

VLAN port mac
1 unknown 0000.cd28.0752
1 port1.0.2 0030.846e.9bf4
1 port1.0.3 0030.846e.bac7
ARP - 0000.cd00.0000
awplus#show mac address-table

VLAN port mac
1 unknown 0000.cd28.0752
1 port1.0.2 0030.846e.bac7
2 unknown 0000.cd28.0752
2 port1.0.3 0030.846e.9bf4
ARP - 0000.cd00.0000
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
type
forward static
forward static
type
forward static
forward dynamic
dynamic 
forward
forward static
type
forward static
forward dynamic
forward static
forward dynamic
forward static

554