Show Ip Resolve-Via-Default - Allied Telesis IE220 Series Manual

R C
OUTING OMMANDS
- -
SHOW IP RESOLVE VIA DEFAULT

show ip resolve-via-default

Overview Use this command to see whether it is possible to use a default route to resolve
next hops in IP routing. By default it is possible, but this can be changed with the
no variant of the command
show ip resolve-via-default
Syntax
Mode User Exec
Example To show whether default routes are used to resolve next hops or not, use the
command:
awplus#
Output Figure 25-1: Example output from show ip resolve-via-default:
Related ip resolve-via-default
commands
Command Version 5.5.3-0.1: command added
changes
C613-50644-01 Rev B
show ip resolve-via-default
awplus#show ip resolve-via-default
IP resolve via default is off
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ip resolve-via-default.
952