Speed - Allied Telesis IE220 Series Manual

S C
WITCHING OMMANDS

SPEED

speed
Overview This command changes the speed of the specified port. You can optionally specify
the speed or speeds that get autonegotiated, so autonegotiation is only
attempted at the specified speeds.
To see the currently-negotiated speed for ports whose links are up, use the
interface
default), use the
Depending on your switch model and the SFP or SFP+ modules you use, a subset
of the following speed options will be available.
speed {10|100|1000|2500|5000|10000|40000|100000}
Syntax
speed auto [10] [100] [1000] [2500] [5000] [10000] [40000]
[100000]
The following table shows the speed options for each type of port, depending on
the model.
C613-50644-01 Rev B
command. To see the configured speed (when different from the
show running-config
Port type
RJ.5 copper ports
RJ-45 copper ports
tri-speed copper SFPs
100 Mbps fiber SFPs
1000 Mbps fiber SFPs
1000 Mbps copper SFPs
1000 Mbps fiber CSFPs (Compact SFPs)
Multi-speed copper SFP+
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command.
Speed Options (units are Mbps)
auto (default)
10
100
1000
auto (default)
10
100
1000
2500
5000
10000
auto (default)
10
100
1000
100
auto (default)
1000
auto (default)
1000
auto (default)
1000
auto (default)
1000
2500
5000
10000
show
567