Allied Telesis IE220 Series Manual page 635

VLAN C
OMMANDS
VLAN
Examples To enable VLAN 45, use the commands:
awplus#
awplus(config)#
awplus(config-vlan)#
To destroy VLAN 45, use the commands:
awplus#
awplus(config)#
awplus(config-vlan)#
To create a management-only VLAN with VID 100, use the commands:
awplus#
awplus(config)#
awplus(config-vlan)#
Related mtu
commands
vlan database
show vlan
Command Version 5.4.9-2.1: Parameter management-only added
changes
Version 5.5.0-1.3: Support for up to 5 VLANs added to AR1050V
C613-50644-01 Rev B
configure terminal
vlan database
vlan 45 name accounts state enable
configure terminal
vlan database
no vlan 45
configure terminal
vlan database
vlan 100 state management-only
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
635