Terminal Monitor - Allied Telesis IE220 Series Manual

S C M
YSTEM ONFIGURATION AND

TERMINAL MONITOR

terminal monitor
Overview Use this command to display debugging output on a terminal.
To display the cursor after a line of debugging output, press the Enter key.
Use the command terminal no monitor or no terminal monitor to stop
displaying debugging output on the terminal. Alternatively, you can use the
timeout option to stop displaying debugging output on the terminal after a set
time.
terminal monitor [<1-60>]
Syntax
terminal no monitor
no terminal monitor
Default Disabled
Mode User Exec and Privileged Exec
Examples To display debugging output on a terminal, enter the command:
awplus#
To display debugging on the terminal for 60 seconds, enter the command:
awplus#
To stop displaying debugging output on the terminal, use the command:
awplus#
Related All debug commands
commands
Command Version 5.4.8-0.2: no terminal monitor added as an alias for terminal no monitor
changes
C613-50644-01 Rev B
C
ONITORING OMMANDS
Parameter Description
<1-60>
Set a timeout between 1 and 60 seconds for terminal output.
terminal monitor
terminal monitor 60
no terminal monitor
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
284