Security-Password Lifetime - Allied Telesis IE220 Series Manual

U A C
SER CCESS OMMANDS
-
SECURITY PASSWORD LIFETIME

security-password lifetime

Overview This command enables password expiry by specifying a password lifetime in days.
Note that when the password lifetime feature is disabled, it also disables the
security-password forced-change
command.
The no variant of the command disables this feature.
security-password lifetime <0-1000>
Syntax
no security-password lifetime
The default password lifetime is 0, which will disable the lifetime functionality.
Default
Mode Global Configuration
Example To configure the password lifetime to 10 days, use the command:
awplus#
awplus(config)#
Related security-password forced-change
commands
security-password history
security-password min-lifetime-enforce
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
security-password warning
show running-config
show security-password configuration
show security-password user
C613-50644-01 Rev B
Parameter Description
<0-1000>
Password lifetime specified in days. A value of 0 will disable lifetime
functionality and the password will never expire. This is equivalent
to the no security-password lifetime command.
configure terminal
security-password lifetime 10
security-password
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command and the security-password warning
178