Table of Contents
Advertisement
I
C
NTERFACE
OMMANDS
SHOW INTERFACE
show interface
Overview
Use this command to display interface configuration and status.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show interface [<interface-list>]
Mode
User Exec and Privileged Exec
Usage notes
Note that the output displayed with this command will show MTU (Maximum
Transmission Unit) size for VLAN interfaces, and MRU (Maximum Received Unit)
size for switch ports.
Example
To display configuration and status information for all interfaces, use the
command:
awplus#
C613-50644-01 Rev B
Parameter
<interface-list> The interfaces or ports to display. An interface-list can be:
show interface
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
• a VLAN (e.g. vlan2)
• a switchport (e.g. port1.0.4)
• a static channel group (e.g. sa2)
• a dynamic (LACP) channel group (e.g. po2)
• the loopback interface (lo)
• a continuous range of interfaces separated by a hyphen
(e.g. vlan10-20)
• a comma-separated list (e.g. vlan1,vlan10-20). Do not mix
interface types in a list.
The specified interfaces must exist.
"Getting Started
Guide.
464
Advertisement
Table of Contents
