IP A
P
DDRESSING AND
ROTOCOL
SHOW DEBUGGING IP PACKET
show debugging ip packet
Overview
Use this command to see what debugging is turned on for IP interfaces. IP interface
debugging is set using the debug ip packet interface command.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show debugging ip packet
Mode
User Exec and Privileged Exec
Example
To display the IP interface debugging status when the terminal monitor is off, use
the commands:
awplus#
awplus#
Output
Figure 22-4: Example output from the show debugging ip packet command
Example
To display the IP interface debugging status when the terminal monitor is on, use
the commands:
awplus#
awplus#
Output
Figure 22-5: Example output from the show debugging ip packet command
Related
debug ip packet interface
commands
terminal monitor
C613-50644-01 Rev B
C
OMMANDS
terminal no monitor
show debugging ip packet
with terminal monitor off
awplus#terminal no monitor
awplus#show debugging ip packet
IP debugging status:
interface all tcp (stopped)
...
terminal monitor
show debugging ip packet
with terminal monitor on
awplus#terminal monitor
awplus#show debugging ip packet
IP debugging status:
interface all tcp (running)
...
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
866