Allied Telesis IE220 Series Manual page 345

C F M
ONNECTIVITY AULT ANAGEMENT
SHOW ETHERNET CFM ERRORLOG
Table 9-3: Parameters in the output from show ethernet cfm errorlog domain
Related clear ethernet cfm errorlog
commands
ethernet cfm domain-name
ethernet cfm mep
mep crosscheck
service ma-name
Command Version 5.4.7-1.1: command added
changes
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
C613-50644-01 Rev B
C
OMMANDS
MD-INST2 (cont.)
Parameter
Error Reason
CFM Service Name
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
One of the following:
"Remote MEP Down" - an RMEPCCMDefect has been
declared for this remote MEP. CCMs have not been
received from this remote MEP within the CCM interval.

"MEP Configuration" - the CCM received from the remote
MEP has the same MEP ID as the local MEP that received
the CCM. For unicast remote MEPs this error can also
indicate that even though the CCM received from the
remote MEP has an MEP ID that matches a configured
remote MEP ID in the MA, the source MAC address differs
from the configured MAC address for that remote MEP.

"Forwarding Loop" - the CCM received from the remote
MEP has an MEP ID that matches a configured local MEP ID
in the MA, and also has the same source MAC address as
the local MEP's MAC address that received the CCM.

"Cross Connected" - a xconCCMdefect was detected.
The name of the MA associated with the MD for this
error(s).
345