Table of Contents
Advertisement
L
A
C
INK
GGREGATION
OMMANDS
-
-
STATIC
CHANNEL
GROUP
static-channel-group
Overview
Use this command to create a static channel group, or to add a port to an existing
static channel group. Static channel groups are also known as static aggregators.
You can create up to 128 channel groups, in any combination of static and
dynamic (LACP) groups. This means you can create up to 128 static channel
groups, if you have no dynamic channel groups.
Use the no variant of this command to remove the device port from the static
channel group.
static-channel-group <static-channel-group-number>
Syntax
no static-channel-group
Mode
Interface Configuration
Usage notes
This command adds the device port to the static channel group with the specified
channel group number. If the channel group does not exist, it is created, and the
port is added to it. The no prefix detaches the port from the static channel group.
If the port is the last member to be removed, the static channel group is deleted.
All the ports in a channel group must have the same VLAN configuration: they
must belong to the same VLANs and have the same tagging status, and can only
be operated on as a group.
Once the static channel group has been created, it is treated as a device port. You
can specify it in other commands by using sa followed by the channel-group
number. For example, use the command show interface sa2 to show details
about channel group 2's interface:
Examples
To define static channel group 2 on port1.0.2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To reference static channel group 2 as an interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
show static-channel-group
commands
C613-50644-01 Rev B
Parameter
<static-channel-
group-number>
configure terminal
interface port1.0.2
configure terminal
interface sa2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Static channel group number from the range 1 to 248.
You can create up to 128 static channel groups.
static-channel-group 2
756
Advertisement
Table of Contents
