Security-Password Forced-Change - Allied Telesis IE220 Series Manual

U A C
SER CCESS OMMANDS
- -
SECURITY PASSWORD FORCED CHANGE

security-password forced-change

Overview This command specifies whether or not a user is forced to change an expired
password at the next login. If this feature is enabled, users whose passwords have
expired are forced to change to a password that must comply with the current
password security rules at the next login.
Note that to use this command, the lifetime feature must be enabled with the
security-password lifetime
disabled with the
The no variant of the command disables this feature.
security-password forced-change
Syntax
no security-password forced-change
Default The forced-change feature is disabled by default.
Mode Global Configuration
Example To force a user to change their expired password at the next login, use the
command:
awplus#
awplus(config)#
Related security-password history
commands
security-password lifetime
security-password min-lifetime-enforce
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
security-password warning
show running-config
show security-password configuration
show security-password user
C613-50644-01 Rev B
command and the reject-expired-pwd feature must be
security-password reject-expired-pwd
configure terminal
security-password forced-change
security-password
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command.
177