Allied Telesis IE220 Series Manual page 918

Industrial ethernet layer 2+ switches, command reference for alliedware plus version 5.5.3-0.x
Table of Contents

Advertisement

IP
6 C
V
OMMANDS
6
IPV
ND PREFIX
Mode
Interface Configuration for a VLAN interface or a local loopback interface.
Usage notes
This command specifies the IPv6 prefix flags that are advertised by the router
advertisement message.
Examples
To configure the device to issue router advertisements on vlan2, and advertise the
address prefix of 2001:0db8::/64, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To configure the device to issue router advertisements on vlan2, and advertise the
address prefix of 2001:0db8::/64 with a valid lifetime of 10 days and a preferred
lifetime of 5 days, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To configure the device to issue router advertisements on vlan2 and advertise the
address prefix of 2001:0db8::/64 with a valid lifetime of 10 days, a preferred lifetime
of 5 days, and no prefix used for autoconfiguration, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
no-autoconfig
To reset router advertisements on vlan2, so the address prefix of 2001:0db8::/64 is
not advertised from the device, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To reset all router advertisements on vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
ipv6 nd suppress-ra
commands
C613-50644-01 Rev B
configure terminal
interface vlan2
ipv6 nd prefix 2001:0db8::/64
configure terminal
interface vlan2
ipv6 nd prefix 2001:0db8::/64 864000 432000
configure terminal
interface vlan2
ipv6 nd prefix 2001:0db8::/64 864000 432000
configure terminal
interface vlan2
no ipv6 nd prefix 2001:0db8::/64
configure terminal
interface vlan2
no ipv6 nd prefix all
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
918

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie220-6ghxIe220-10ghx

Table of Contents