Clear Loop-Protection Counters - Allied Telesis IE220 Series Manual

S C
WITCHING OMMANDS
-
CLEAR LOOP PROTECTION COUNTERS

clear loop-protection counters

Overview Use this command to clear the loop protection counters.
clear loop-protection [interface <port-list>] counters
Syntax
Mode Privileged Exec
Examples To clear the counter information for all interfaces:
awplus#
To clear the counter information for a single port:
awplus#
Related show loop-protection
commands
C613-50644-01 Rev B
Parameters Description
interface
The interface whose counters are to be cleared.
<port-list>
A port, a port range, or an aggregated link.
clear loop-protection counters
clear loop-protection interface port1.0.1 counters
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
514