Mac Address-Table Thrash-Limit - Allied Telesis IE220 Series Manual

S C
WITCHING OMMANDS
- -
MAC ADDRESS TABLE THRASH LIMIT

mac address-table thrash-limit

Overview Use this command to set the thrash limit on the device.
Thrashing occurs when a MAC address table rapidly "flips" its mapping of a single
MAC address between two switchports on the same VLAN. This is usually because
of a network loop.
Use the no variant of this command to return the thrash limit to its default setting.
mac address-table thrash-limit <rate>
Syntax
no mac address-table thrash-limit
Default 10 MAC thrashing flips per second
Mode Global Configuration
Usage notes Use this command to limit thrashing on the selected port range.
Example To apply a thrash limit of 20 MAC address flips per second:
awplus#
awplus(config)#
Related show interface
commands
show mac address-table thrash-limit
thrash-limiting
C613-50644-01 Rev B
Parameter Description
<rate>
The maximum thrash rate at which limiting is applied. This rate can be set
to between 5 and 255 MAC thrashing flips per second. Once the thrash
limit rate is reached, the port is considered to be thrashing.
configure terminal
mac address-table thrash-limit 20
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
537