Allied Telesis IE220 Series Manual page 582

Industrial ethernet layer 2+ switches, command reference for alliedware plus version 5.5.3-0.x
Table of Contents

Advertisement

S
C
WITCHING
OMMANDS
-
THRASH
LIMITING
To block all traffic on a VLAN on port1.0.1 if the switch detects thrashing for that
VLAN on that port, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the thrash limiting action to its default on port1.0.1, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the thrash limiting timeout to 5 seconds on port1.0.1, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the thrash limiting timeout value to its default on port1.0.1, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
mac address-table thrash-limit
commands
show interface
C613-50644-01 Rev B
configure terminal
interface port1.0.1
thrash-limiting action vlan-disable
configure terminal
interface port1.0.1
no thrash-limiting action
configure terminal
interface port1.0.1
thrash-limiting timeout 5
configure terminal
interface port1.0.1
no thrash-limiting timeout
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
582

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie220-6ghxIe220-10ghx

Table of Contents