Allied Telesis IE220 Series Manual page 466

I C
NTERFACE OMMANDS
SHOW INTERFACE
Figure 12-3: Example output from the show interface vlan1 command:
awplus#show interface vlan1
Interface vlan1
Link is UP, administrative state is UP
Hardware is VLAN, address is 0000.cd38.026c
IPv4 address 192.168.1.1/24 broadcast 192.168.1.255
index 301 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Not bound
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 9, bytes 612, multicast packets 0, broadcast packets 0
input average rate : 30 seconds 0 bps, 5 minutes 0 bps
output average rate: 30 seconds 0 bps, 5 minutes 0 bps
output peak rate 140 bps at 2018/04/10 16:40:56
Time since last state change: 8 days 19:09:19
Related ecofriendly lpi
commands
mru
mtu
show interface brief
show interface status
Command Version 5.4.7-2.1: average rate and peak rate added to output
changes
C613-50644-01 Rev B Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
466