Allied Telesis IE220 Series Manual page 792

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE INTERFACE DETAIL
Table 4: Parameters in show power-inline interface detail output (cont.)
Related show power-inline
commands
show power-inline interface
Command Version 5.4.8-0.2: added to x550 series products
changes
C613-50644-01 Rev B
Parameter Description
Detection of
The status of legacy PoE detection on the PoE port (enabled or
legacy
disabled), as configured for the PoE port with the
devices is
allow-legacy
a large capacitance value to confirm the presence of a legacy PD.
Powered pairs
The IEEE 802.3af and IEEE 802.3at standards allow for either data
or spare twisted pairs to be used to transfer power to a PD.
Autoclass
Whether autoclass is enabled on the port, as set by the
power-inline autoclass
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command. Legacy detection involves measuring for
command.
power-inline
792