IP A
P
DDRESSING AND
ROTOCOL
-
IP TCP
TIMESTAMP
ip tcp-timestamp
Overview
Use this command to enable TCP timestamp responses.
Use the no variant of this command to disable TCP timestamp responses.
You may wish to disable timestamp responses because TCP timestamps may allow
other parties to remotely calculate the system uptime and boot time of the device
and the device's clock. To prevent this information leaking to potential attackers,
we recommend you disable TCP timestamps on the device, unless you need to use
them.
ip tcp-timestamp
Syntax
no ip tcp-timestamp
Default
Enabled
Mode
Global Configuration
Example
To disable TCP timestamp responses, use the commands:
awplus#
awplus(config)#
To enable TCP timestamp responses again, use the commands:
awplus#
awplus(config)#
Related
ip icmp-timestamp
commands
Command
Version 5.5.2-0.1: command added
changes
C613-50644-01 Rev B
C
OMMANDS
configure terminal
no ip tcp-timestamp
configure terminal
ip tcp-timestamp
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
857