Http Secure-Port - Allied Telesis IE220 Series Manual

D GUI V M
EVICE AND ISTA ANAGER
-
HTTP SECURE PORT

http secure-port

Overview Use this command to change the HTTPS port used to access the web-based device
GUI, or to disable HTTPS management.
Use the no variant of this command to return to using the default port, which is
443.
Syntax http secure-port {<1-65535>|none}
no http secure-port
Default The default port for accessing the GUI is port 443.
Mode Global Configuration
Usage notes Do not configure the HTTPS port to be the same as the HTTP port.
Note that if you are using Vista Manager EX and need to change the HTTPS port,
you must use certificate-based authorization in Vista Manager EX. See the
Manager EX Installation Guide
Example To set the port to 8443, use the commands:
awplus#
awplus(config)#
To return to using the default port of 443, use the commands:
awplus#
awplus(config)#
To stop users from accessing the GUI via HTTPS, use the commands:
awplus#
awplus(config)#
Related http port
commands
service http
show http
Command Version 5.4.7-1.1: command added on AR-Series devices
changes
Version 5.4.7-2.4: none parameter added
Version 5.4.8-0.2: command added on AlliedWare Plus switches
C613-50644-01 Rev B
EX C
OMMANDS
Parameter Description
<1-65535>
The HTTPS port number
none
Disable HTTPS management. Do not do this if you want to use
Vista Manager EX or the GUI.
configure terminal
http secure-port 8443
configure terminal
no http secure-port
configure terminal
http secure-port none
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
for instructions.
Vista
98