Debug Udld - Allied Telesis IE220 Series Manual

U L D
NIDIRECTIONAL INK ETECTION

DEBUG UDLD

debug udld
Overview Use this command to enable UDLD debugging.
Use the no variant of this command to disable UDLD debugging.
Syntax debug udld [info|pkt|state|nsm|all]
no debug udld [info|pkt|state|nsm|all]
Default Debugging is disabled for all by default.
Mode Global Configuration
Privileged Exec
Example To enable UDLD packet debugging, use the commands:
awplus#
awplus(config)#
Related show debugging udld
commands
undebug udld
C613-50644-01 Rev B
(UDLD) C
OMMANDS
Parameter Description
info
Enable or disable general UDLD debugging information.
pkt
Enable or disable debugging of UDLD packets.
state
Enable or disable UDLD state transition debugging.
nsm
Enable or disable UDLD Network Service Module (NSM)
debugging information.
all
Enable or disable the all UDLD debugging.
configure terminal
debug udld pkt
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
720