Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
IP FORWARDING
ip forwarding
Overview
This command enables IP forwarding on your device. When enabled, your device
routes IP packets.
The no variant of this command disables IP forwarding on your device. Even when
IP forwarding is not enabled, the device can still work as an IP host; in particular, it
can be managed by IP-based applications, such as SNMP, Telnet and SSH.
ip forwarding
Syntax
no ip forwarding
Default
IP forwarding is enabled by default.
Mode
Global Configuration
Examples
To enable your device to route IP packets, use the commands:
awplus#
awplus(config)#
To stop your device from routing IP packets, use the commands
awplus#
awplus(config)#
Related
show ip forwarding
commands
C613-50644-01 Rev B
C
OMMANDS
configure terminal
ip forwarding
configure terminal
no ip forwarding
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
832
Advertisement
Table of Contents
