Allied Telesis IE220 Series Manual page 616

VLAN C
OMMANDS
-
SWITCHPORT MODE PRIVATE VLAN TRUNK SECONDARY
Examples To create isolated private VLAN 2 and then enable port1.0.3 in trunk mode as a
secondary port for this VLAN with the group ID of 3, use the following commands:
awplus#
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
group 3
To remove port1.0.3 in trunk mode as a secondary port, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
secondary
Related switchport mode private-vlan trunk promiscuous
commands
switchport mode trunk
switchport trunk allowed vlan
switchport trunk native vlan
show vlan private-vlan
C613-50644-01 Rev B
configure terminal
vlan database
vlan 2
private-vlan 2 isolated
exit
interface port1.0.3
switchport mode trunk
switchport trunk allowed vlan add 2
switchport mode private-vlan trunk secondary
configure terminal
interface port1.0.3
no switchport mode private-vlan trunk
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
616