Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
DEBUG IP PACKET INTERFACE
debug ip packet interface
Overview
The debug ip packet interface command enables IP packet debug and is
controlled by the terminal monitor command.
If the optional icmp keyword is specified then ICMP packets are shown in the
output.
The no variant of this command disables the debug ip packet interface
command.
debug ip packet interface {<interface-name>|all} [address
Syntax
<ip-address>|verbose|hex|arp|udp|tcp|icmp]
no debug ip packet interface [<interface-name>]
Mode
Privileged Exec and Global Configuration
C613-50644-01 Rev B
C
OMMANDS
Parameter
<interface-name> Specify a single Layer 3 interface name (not a range of
all
<ip-address>
verbose
hex
arp
udp
tcp
icmp
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
interfaces)
This keyword can be specified as either all or as a single Layer
3 interface to show debugging for either all interfaces or a
single interface.
Specify all Layer 3 interfaces on the device.
Specify an IPv4 address.
If this keyword is specified, then only packets with the
specified IP address as specified in the ip-address placeholder
are shown in the output.
Specify verbose to output more of the IP packet.
If this keyword is specified then more of the packet is shown in
the output.
Specify hex to output the IP packet in hexadecimal.
If this keyword is specified, then the output for the packet is
shown in hex.
Specify arp to output ARP protocol packets.
If this keyword is specified, then ARP packets are shown in the
output.
Specify udp to output UDP protocol packets.
If this keyword is specified then UDP packets are shown in the
output.
Specify tcp to output TCP protocol packets.
If this keyword is specified, then TCP packets are shown in the
output.
Specify icmp to output ICMP protocol packets.
If this keyword is specified, then ICMP packets are shown in
the output.
825
Advertisement
Table of Contents
