Allied Telesis IE220 Series Manual page 356

Industrial ethernet layer 2+ switches, command reference for alliedware plus version 5.5.3-0.x
Table of Contents

Advertisement

C
F
M
ONNECTIVITY
AULT
ANAGEMENT
SHOW ETHERNET CFM SERVICE
Table 9-7: Parameters in the output from show ethernet cfm service (cont.)
Figure 9-12: Example output from show ethernet cfm service MA-INST2-1
Table 9-8: Parameters in the output from show ethernet cfm service
C613-50644-01 Rev B
C
OMMANDS
Parameter
VLAN
Defect
domain MD-INST2 details
awplus#show ethernet cfm service MA-INST2-1 domain MD-INST2
details
CFM Service Name................ MA-INST2-1
CFM Domain Name................. MD-INST2
CFM Domain Level................ 3
Primary VLAN.................... -
Maintenance Assoc Name Format... string
Maintenance Assoc Name Value.... MA-12V100
CCM Transmission Interval....... 1 second
Local MEPs...................... MEP DOWN 
Configured Remote MEPs.......... 21
Missing Remote MEPs............. 21
Current MEP Defects............. 3 (someRMEPCCMdefect)
MIP Creation.................... None
<ma-name> domain <domain-name> details
Parameter
CFM Service Name
CFM Domain Name
CFM Domain Level
Primary VLAN
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The Primary VLAN.
A list of defects detected by the MA's Local MEPs. The
defects shown can be:
1 - someRDIdefect is declared
2 - someMACstatusDefect is declared
3 - someRMEPCCMdefect is declared
4 - errorCCMdefect is declared
5 - xconCCMdefect is declared
12 (interface port1.0.2)
Description
The Maintenance Associations (MA) instance name.
The Maintenance Domain name for the managed object.
The level of the domain.
The Primary VLAN that was configured (if any).
356

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie220-6ghxIe220-10ghx

Table of Contents