Private-Vlan - Allied Telesis IE220 Series Manual

VLAN C
OMMANDS
-
PRIVATE VLAN

private-vlan

Overview Use this command to a create a private VLAN. Private VLANs can be either primary
or secondary. Secondary VLANs can be either community or isolated.
Alternatively, private VLANs can be UFO (Upstream Forwarding Only). Private
VLAN port members are either 'downstream' or 'upstream'. Once a private VLAN is
configured as UFO, its port members by default are downstream.
Use the no variant of this command to remove the specified private VLAN.
For more information, see the
Syntax private-vlan <vlan-id> {community|isolated|primary|ufo}
no private-vlan <vlan-id> {community|isolated|primary|ufo}
Mode VLAN Configuration
Examples To configure a set of private VLANs, use the following commands:
awplus#
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
To remove a set of private VLANs, use the following commands:
awplus#
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
C613-50644-01 Rev B
Parameter Description
<vlan-id>
VLAN ID in the range <2-4094> for the VLAN which is to be made a
private VLAN.
community
Community VLAN.
isolated
Isolated VLAN.
primary
Primary VLAN.
ufo
Upstream Forwarding Only (UFO) VLAN.
configure terminal
vlan database
configure terminal
vlan database
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN Feature Overview and Configuration
vlan 2 name vlan2 state enable
vlan 3 name vlan3 state enable
vlan 4 name vlan4 state enable
private-vlan 2 primary
private-vlan 3 isolated
private-vlan 4 community
no private-vlan 2 primary
no private-vlan 3 isolated
no private-vlan 4 community
Guide.
592