Allied Telesis IE220 Series Manual page 641

VLAN C
OMMANDS
VLAN CLASSIFIER RULE PROTO
Mode Global Configuration
Usage notes If the protocol type matches the protocol specified in the VLAN classifier rule, the
received packets are mapped to the specified VLAN. Ethernet Frame Numbers may
be entered in place of the protocol names listed. For a full list please refer to the
IANA list online:
www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.txt
C613-50644-01 Rev B
Parameter Description
[decsyscomm|24583]
[g8bpqx25|2303]
[ieeeaddrtrans|2561]
[ieeepup|2560]
[ip|2048]
[ipv6|34525]
[ipx|33079]
[netbeui|61680]
[netbeui|61681]
[pppdiscovery|34915]
[pppsession|34916]
[rarp|32821]
[x25|2056]
[xeroxaddrtrans|513]
[xeroxpup|512]
ethv2
Ethernet Version 2 encapsulation
nosnapllc
LLC without SNAP encapsulation
snapllc
LLC SNAP encapsulation
<1-4094>
Specify a VLAN ID to which an untagged packet is mapped in the
range <1-4094>
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DEC Systems Comms
Arch protocol
G8BPQ AX.25 protocol
Xerox IEEE802.3 PUP
Address
Xerox IEEE802.3 PUP
protocol
IP protocol
IPv6 protocol
IPX protocol
IBM NETBIOS/NETBEUI
protocol
IBM NETBIOS/NETBEUI
protocol
PPPoE discovery protocol
PPPoE session protocol
Reverse Address
Resolution protocol
CCITT.25 protocol
Xerox PUP Address
Translation protocol
Xerox PUP protocol
641