Switchport Private-Vlan Mapping - Allied Telesis IE220 Series Manual

VLAN C
OMMANDS
-
SWITCHPORT PRIVATE VLAN MAPPING

switchport private-vlan mapping

Overview Use this command to associate a primary VLAN and a set of secondary VLANs to a
promiscuous port.
Use the no variant of this to remove all the association of secondary VLANs to
primary VLANs for a promiscuous port.
Syntax switchport private-vlan mapping <primary-vlan-id> add
<secondary-vid-list>
switchport private-vlan mapping <primary-vlan-id> remove
<secondary-vid-list>
no switchport private-vlan mapping
Mode Interface Configuration
Usage notes This command can be applied to a switch port or a static channel group, but not a
dynamic (LACP) channel group. LACP channel groups (dynamic/LACP
aggregators) cannot be promiscuous ports in private VLANs.
awplus#
Examples
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
Related switchport mode private-vlan
commands
C613-50644-01 Rev B
Parameter
<primary-vlan-id>
<secondary-vid-list> VLAN ID of the secondary VLAN (either isolated or
configure terminal
interface port1.0.2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
VLAN ID of the primary VLAN.
community), or a range of VLANs, or a comma-separated
list of VLANs and ranges.
switchport private-vlan mapping 2 add 3-4
switchport private-vlan mapping 2 remove 3-4
no switchport private-vlan mapping
621