Table of Contents
Advertisement
VLAN C
OMMANDS
-
SHOW VLAN PRIVATE
VLAN UFO
show vlan private-vlan ufo
Overview
Use this command to show the configuration status of a private VLAN UFO-based
VLAN(s) and member interfaces.
show vlan private-vlan ufo {all|<vlan-id>}
Syntax
Mode
User Exec/Privileged Exec.
Usage notes
Private VLANs can be UFO (Upstream Forwarding Only). Private VLAN port
members are either "downstream" or "upstream" which are controlled by a
protocol or by static configuration.
Example
To show all the private-vlan UFO interfaces, use the command:
awplus#
Output
Figure 16-13: Example output from show vlan private-vlan ufo all
awplus#show vlan private-vlan ufo all
VLAN
INTERFACES CONFIGURED
-----------------------------------------------------------------------------
100
port1.0.1
primary-upstream
100
port1.0.2
secondary-upstream downstream
100
port1.0.3
-
200
port1.0.4
epsr
200
sa1
epsr
200
port1.0.5
-
300
port1.0.6
-
300
port1.0.7
-
300
port1.0.8
-
400
Port1.0.9
stp
400
Port1.0.10 stp
400
Port1.0.11
Command
Version 5.4.7-2.1: command added
changes
Version 5.4.8-2.1: added to SBx8100 Series products
Version 5.4.9-0.1: added to x530 Series products
C613-50644-01 Rev B
Parameter
Description
<vlan-id>
A specific VLAN. This must have been configured previously as a
private-vlan UFO.
all
All VLANs that have been configured previously as private-vlan
UFO.
show vlan private-vlan ufo all
TYPE
upstream
downstream
downstream
upstream
downstream
downstream-fault Static
downstream-fault Static
downstream-fault Static
upstream
downstream
downstream
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PROTOCOL MISC
UFO
-
UFO
-
Static
-
EPSR
-
EPSR
0030.846e.bac7
Static
-
-
-
-
STP
0030.846e.9bf4
STP
-
Static
-
608
Advertisement
Table of Contents
