JVL MAC050 User Manual page 99

3.2
3.2.12 Power cable accessories for MAC400
The following standard cables can be supplied by JVL
JVL no.
WP0002
WP0005
WP0020
WP0102
WP0105
WP0120
WP0402
WP0405
WP0420
Please use the illustration below when connecting the cables.
Warning: Please notice that it can be fatal connecting 230V to the 115V input.
Input supply cable type: WP0002, WP0005, WP0020
Power dump / DC output cable type: WP0102, WP0105, WP0120
Input supply cable type: WP0402, WP0405, WP0420
TT1194GB
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Power Supply
Type Description
MAC400 115/230VAC power cable 2 m. Straight M16 conn and free end. Female
MAC400 115/230VAC power cable 5 m. Straight M16 conn and free end. Female
MAC400 115/230VAC power cable 20 m. Straight M16 conn and free end. Female
MAC400 Brake resistor cable 2 m. Straight M16 conn and free end. Male
MAC400 Brake resistor cable 5 m. Straight M16 conn and free end. Male
MAC400 Brake resistor cable 20 m. Straight M16 conn and free end. Male
MAC400 230V power cable with earth 2m. Straight M16 conn and free end. Female
MAC400 230V power cable with earth 5m. Straight M16 conn and free end. Female
MAC400 230V power cable with earth 20m. Straight M16 conn and free end. Female
General information:
Make sure that any unused wires are isolated and stay unconnected
Only MAC400
Blue
Neutral / 0
Red
Input 115VAC (phase)
Brown
Input 230VAC (phase)
Grn./Yel.
Earth " "
White
Bus Out 325VDC
Yellow
Power Dump Output
Brown
Common
Grn./Yel.
Earth " "
Blue
Neutral / 0
Grn./Yel.
Earth " "
Brown
Input 230VAC (phase)
95