JVL MAC050 User Manual page 173

5.3 Expansion module MAC00-B41
IO1
Basic I/O's
M12 - 8pin male
connector including:
6 I/O's (IO1 to IO6)
CVO and GND.
COM
Communication
M12 - 8pin female
connector including:
RS232, RS485 and
USB interface
5.3.14 Expansion MAC00-B41 connector description
The MAC00-B41 offers IP65 protection and M12 connectors which makes it ideal for au-
tomation applications where no additional protection is desired. The M12 connectors of-
fer solid mechanical protection and are easy to unplug compared to modules with cable
glands or DSUB connectors.
The connector layout:
"PWR" - Power input. M12 - 5pin male connector
Signal name
P+
P+
P-
CVI
P-
* Note: P+ and P- are each available at 2 terminals. Make sure that both terminals are connected in order
to split the supply current in 2 terminals and thereby avoid an overload of the connector.
(Continued next page)
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Expansion module MAC00-B41 front plate
Description
Main supply +18-32VDC. Connect with pin 2
Main supply +18-32VDC. Connect with pin 1
Main supply ground. Connect with pin 5
Control and user output supply +18-32VDC.
Connect MAXIMUM 32VDC to this terminal
Main supply ground. Connect with pin 3
TT1132GB
*
*
Only MAC400 to 4500
PWR
Power supply
M12 - 5pin male
connector including:
P+ (primary supply), and CVI
(secondary supply)
IO2
Extended I/O's
M12 - 12pin female
connector including:
Multifunction ch. 1 + 2
and 2 analogue inputs
JVL Cable
WI1000-
Pin no. M12F5T05N
* 1 Brown
* 2 White
3 Blue
4 Black
5 Grey
and P-
Isolation
group
1
1
1
1
1
169