JVL MAC050 User Manual page 179

5.4 Expansion module MAC00-B42
IO1
Basic I/O's
M12 - 8pin male
connector including:
IN1-4 and O1-2
O+ and IO-
IO2
Extended I/O's
M12 - 8pin female
connector including:
IN5-8 and O3-4
AIN and GND
5.4.5 Expansion MAC00-B42 hardware description
The MAC00-B42 offers IP65 protection and M12 connectors which make it ideal for au-
tomation applications where no additional protection is desired. The M12 connectors of-
fer solid mechanical protection and are easy to operate.
The connector layout:
"PWR" - Power input. M12 - 5-pin male connector
Signal name
P+
P+
P-
Unused
P-
* Note: P+ and P- is each available at 2 terminals. Make sure that both terminals are connected in order to
split the supply current between 2 terminals and thereby avoid an overload of the connector.
"COM" - Interface RS232 and RS485. M12 - 5-pin female connector
Signal name
RS232 Rx
RS232 Tx
RS485 B+
RS485 A-
GND
Note 1: See also
(Continued next page)
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Expansion module MAC00-B42 front plate
Description
Main supply +18-32VDC. Connect with pin 2 *
Main supply +18-32VDC. Connect with pin 1 *
Main supply ground. Connect with pin 5 *
Future option
Main supply ground. Connect with pin 3 *
Description
RS232 interface receive terminal.
Leave open if unused
RS232 interface transmit terminal.
Leave open if unused. - Important, see note1:
RS485 interface terminal.
Leave open if unused
RS485 interface terminal.
Leave open if unused
Interface ground (same as main ground).
Dip switch for RS485 active termination, page 176
PWR
Power
M12 - 5pin male
connector including:
P+ and
COM
Interface RS232 and RS485
M12 - 5pin female
connector including:
RS232 RX
RS485 A
GND
Hardware serial number
Pin no.
1
2
3
4
5
Pin no.
1
2
3
4
5
Only MAC400 to 4500
P-
and TX
and B
TT1280-10GB
JVL Cable
WI1000M12 Isolation
F5T05N group
Brown 1
White 1
Blue 1
Black -
Grey 1
JVL Cable
WI1000M12 Isolation
M5T05N group
Brown 1
White 1
Blue 1
Black 1
Grey 1
175