JVL MAC050 User Manual page 278

5.8 Expansion Module MAC00-FP2/FP4
5.8.5 Input data (Slave->Master)
The MAC00-FP2/4 contains 8 bytes of input data.
Address Name
0
1
2
3
4
5
6
7
Read Data
For 16 bit registers, the read value will be placed in Read data 0 and Read data 1.
For 32 bit registers, the read value will be placed in Read data 0-3.
Motor status
Bit
Function
Bit 6
Bit 5
Bit 4
Bit 0
Input status
Bit
Function
Bit 5 (PL) Positive limit input.
Bit 4 (NL) Negative limit input.
Bit 3-0 (INx) user inputs.
Last direct register
See page 271
274
Read data 3 (MSB)
Read data 2
Read data 1
Read data 0
Motor status
Input status
Last direct register
Command Status
7 6
- Decelerating
(Decelerating) this bit is 1 when the motor is decelerating.
(Accelerating) this bit is 1 when the motor is accelerating.
(In position) this bit is 1 when the motor has reached its commanded position.
(Error) this bit is 1 when a motor error has occurred.
7 6
- -
for details.
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Description
Data read from register
--- "---
--- "---
--- "---
Status bits for the motor
Status of inputs
Last accepted direct FlexMac command
Status bits for commands
5 4
Accelerating In position -
5 4 3
PL NL IN4
3 2 1
- -
2 1
IN3 IN2
0
Error
0
IN1